Advantech DLoG DLT-V4108, Руководство пользователя

Страница: 32 / 81

DLT-V4108 settings
32 / 81 DLT-V4108 Manual, V01 Prelim Advantech-DLoG
11. DLT-V4108 settings
WARNING
Risk of injury and damage due to improper configuration.
These instructions are directed to skilled personnel. Only qualified skilled personnel (e.g. IT
personnel with good knowledge of PCs, operating systems and wireless networks) may
configure DLT-V4108.
If DLT-V4108 is incorrectly configured, the DLoG GmbH warranty for this device will be void.
11.1. Protecting the display from the memory effect
The display of the DLT-V4108 has to be protected from the burning in of a motionless image. An
image that has remained motionless for too long can cause irreversible damage to the display.
In the power management center of the utilized operating system, you must specify that the
display of the DLT-V4108 should be turned off when no user input occurs.
A motionless image can stay on the display for a maximum of 12 hours. After more than 12 hours
there is the risk of the memory effect.
11.2. (Re)calibrating the touchscreen
The touchscreens of all DLT-V4108 devices are already calibrated and therefore do not have to
be calibrated when first put into operation.
Software recalibration under Windows 7 Pro, Windows 8.1 Industry and WE8S
These Microsoft Windows versions offer the option of software recalibration for the touchscreen
( Control Panel -> Tablet PC Settings ).
This resets the sensitivity of the touchscreen to an operating system default setting, which can
result in poorer detection of taps on the screen.
You can use Reset to reset the software recalibration.