Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 7

Страница: 7 / 81

Functional description

Advantech-DLoG

DLT-V4108 Manual, V01 Prelim

7 / 81

Functional description

2.1.

Intended use

DLT-V4108 Industrial PC is a data communication terminal for using in commercial environments

(e.g. logistics, warehouse, manufacture site). Any other or additional usage beyond this shall be

deemed as improper usage. The operator of DLT-V4108 is solely responsible for any resulting

damage. This also applies to any unauthorized modifications made to this device.

DLT-V4108 is intended to be used either with the original Advantech-DLoG power cable or an

Advantech-DLoG certified external DC power supply with 9 to 60 VDC and 5 A. The maximum

system operation temperature is +50 °C.

If need further assistance, please contact Advantech-DLoG for further information.

Intended use includes the compliance with all safety instructions and the compliance with the

approved environmental conditions and specifications for this device.

DLT- V4108 Industrial PC:

−

is not approved to be used in any EX zone (potential explosion hazard), on ships and railed

vehicles.

−

is not approved to be used in any life-support system or critical safety system where system

malfunction can lead to direct or indirect endangerment of human life.

Accessories

Only use accessories that have been tested and approved by Advantech-DLoG for the respective

DLT-V4108. Otherwise, any DLoG GmbH warranty for this device will be void.

Requirements for safe operation

The requirements are:

−

Proper transport and storage.

−

Proper setup and use.

−

Proper maintenance and service.

−

Operation by trained personnel.

Permitted environmental conditions

DLT-V4108 industrial PCs may only be used under specified environmental conditions.

Observe the environmental conditions of the device (specified in chapter

6 Technical data

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды