Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 20

Страница: 20 / 81

Operating the DLT-V4108

20 / 81

DLT-V4108 Manual, V01 Prelim

Advantech-DLoG

7.4.

Operating the touchscreen

Operate the touchscreen with:

−

Clean, dry fingers.

−

Clean, dry, thin gloves.

−

Suitable touch stylus with capacitive (electrically conductive) tip.

NOTICE: Physical damage

Water on the PCT touchscreen can be interpreted as a "touch" and lead to malfunctions.

Prevent damage to the PCT touchscreen

−

Keep the touchscreen clean.

−

Do not touch the touchscreen with pointed, sharp, rough or hard objects, e.g. ball point pens,

writing implements, tools of any kind (e.g. screwdrivers).

−

Prevent any kind of adhesive applied on the surface.

−

Ensure that the screen surface is not influenced by high voltages or static electricity.

−

Do not use excessive force when touching touchscreens, do not hit or press hard.

−

Do not put the device down with the touchscreen facing down, if necessary, place a clean

cloth underneath.

Multi-touch capability

Depending on the installed operating system type, the PCT touchscreen of the DLT-V4108 is

multi-touch capable. This means it can detect two touches simultaneously.

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды