Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 54

Страница: 54 / 81

Mechanical installation

54 / 81

DLT-V4108 Manual, V01 Prelim

Advantech-DLoG

14.1.1.

Installation of the DLT-V4108 on vehicles

WARNING

Observe the requirements of the vehicle manufacturer.

−

Observe the requirements of the vehicle manufacturer for the attachment of auxiliary

devices and the connection of auxiliary consumers.

−

Observe all requirements that relate to welding or drilling support parts.

Risk of accident on vehicles due to limited field of view of the driver.

−

Inside the vehicle the driver's field of vision must remain free.

−

During installation, plan for sufficient space for the DLT-V4108 and accessories.

−

Make sure that the driver's field of vision is not restricted in a prohibited.

−

No part of the DLT-V4108 system may project beyond the vehicle.

Risk of accident on vehicles due to unexpected vehicle emergency stop because of

electro conductive connection of the DLT-V4108 to the vehicle chassis

Due to a variety of technical properties of forklifts and forklift trucks, it can be necessary to

electrically isolate DLT-V4108 from the chassis of the vehicle to prevent malfunctions. The

necessity of this must be studied on a case-by-case basis, however, it is recommended for

vehicles with potential-free chassis.

For example, using rubber buffers ensures that the terminal has no electrically conducting

connection to the vehicle chassis.

If peripheral equipment (such as scanners, printers, scales or similar), which has its own power

supply unit is used, you must ensure that the power supply units of these peripherals are

galvanically separated from the supply of the vehicle.

Moreover, the peripheral equipment and its cabling must be attached electrically isolated.

If external antennas are being used, you must ensure that the antennas are isolated at the

mounting point on the vehicle chassis.

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды