Advantech DLoG DLT-V4108 Скачать руководство пользователя страница 10

Страница: 10 / 81

Safety instructions

10 / 81

DLT-V4108 Manual, V01 Prelim

Advantech-DLoG

Safety instructions

Please read and observe all safety instructions you received enclosed with the

product.

3.1.

UPS BATTERY PACK SAFETY NOTE

DANGER

RISK OF EXPLOSION !

The DLT-V4108 has an integrated uninterrupted power supply (UPS). The battery pack

(lithium-ion technology) of the UPS is located inside of the device.

Only the manufacturer and its authorized service centers may open the DLT-V4108 device and

insert/remove the battery pack

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

Personal injury due to short-circuit, fire, chemical burns, toxic substances.

The integrated UPS lithium-ion battery packs can ignite if the DLT-V4108 is handled or stored

improperly (risk of fire), cause chemical burns or release toxic substances.

−

Use care when handing the DLT-V4108.

−

Do not damage the DLT-V4108; otherwise lithium-ion battery packs could be damaged.

−

Do not allow the DLT-V4108 to come into contact with fire.

−

Store the DLT-V4108 in a cool and dry location and comply with the specified storage

temperature and air humidity.

−

Provide for sufficient ventilation of the storage location.

−

Do not store the device near source of heat or fire, open flames or heaters.

−

Do not allow it to come into contact with fire.

Содержание DLoG DLT-V4108


















































































Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды

Advantech DLoG DLT-V4108, Руководство пользователя

Результаты поиска

Содержание DLoG DLT-V4108

Отзывы:

Похожие инструкции для DLoG DLT-V4108

Бренды по названию

Популярные бренды