Advanced Instruments 3900, Руководство пользователя

Страница: 39 / 131

implemented setup functions in the order in which they appear in
the SETUP menu; however, the order in which they appear may
change slightly if the firmware is later updated to include addi-
tional SETUP items.
The operating parameters that may be checked and set via SETUP are
shown in Table 5.
Enter SETUP, if required, by pressing the SETUP button. When SETUP
is pressed, the display will change to “ Select Setup Item ”.
There are two ways to select a SETUP menu item, direct selection and
sequential selection, described as follows:
0. Select Setup Item
This menu item is displayed first when SETUP is pressed and allows
either direct selection or sequential selection of a menu item.
21
Instrument Operation
0. Select Setup Item
1. Set Block Bin #
2. Set Sample Bin #
3. Select Batch
4. Select Barcode
5. Set Stir Amplitude
6. Set Date/Time
7. Select Beeper
8. Set Serial Rate
9. Select Data Capture
10. Select Xon/Xoff
11. Serial Number
12. Select Range
13. Set "Buzz" Point
14. Select Language
15. Product/Test
16. Reservoir Status
Setup Mode Options
Table 5: Setup Menu Options