background image

CONNECTING TO THE ELECTRICAL GRID

         

  DANGER:

Risk of electrical shock. Before connecting the inverter to the electrical utility

grid, your utility company must grant approval. Only qualified electricians

should make the connection to the utility grid.

  DANGER:

Risque d’électrocution. L’autorisation officielle de votre compagnie locale

d’électricité est requise avant de brancher l’onduleur sur le réseau public.

Seul le personnel qualifié est autorisé à brancher le dispositif sur le réseau

public d’électricité.

  DANGER:

RISK OF DEATH OR BODILY INJURY. Disconnect and lockout/tagout all

sources of input power before working on this unit or anything connected to

it.

  DANGER:

RISQUE DE MORT OU DE BLESSURES CORPORELLES. Débrancher et

verrouiller/étiqueter toutes les sources de puissance d’entrée avant de

travailler sur cette unité ou sur tout élément qui y est raccordé.

  CAUTION:

Risk of electrical shock. All electrical installations should be accomplished in

accordance with applicable national or local standards.

  ATTENTION:

Risque d'électrocution. Toutes les installations électriques doivent se faire

conformément aux normes nationales ou locales applicables.

  DANGER:

Electrical connections must comply with national and local standards.

Voltage drop and other considerations may dictate that larger wire sizes be

used.

  DANGER:

Les connexions électriques doivent être conformes aux normes nationales et

locales. Des chutes de tension et autres facteurs peuvent imposer l’usage de

fils de plus gros calibre.

Advanced Energy

4‑24

Installing

570-1003552-05A

Содержание AE 3TL 1000 Series































































































































Отзывы: