ADS ECHO 9000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 73 / 105

6-2 ADS ECHO Manual
Maintaining the System Components
The ECHO should require little on-site maintenance. Reviewing Collect and Diagnostic logs from a
remote location should be sufficient to verify proper operation. On-site visits should only be necessary if
communication issues occur and/or the recorded data does not appear to be accurate.
Note:
The only service or maintenance activities ADS permits within the monitor chassis are
battery pack, SIM card, and processor fuse replacement. Therefore, please do not handle, alter,
modify, remove, or replace any other components inside the monitor. This may void the monitor
warranty agreement.
Inspecting the Monitor
Perform the following inspections during site visits or from a remote location (when applicable):
⚫
Inspect the monitor mounting hardware to verify that it is tightened and secure.
⚫
Inspect the Mounting Bar tether to ensure it is still secure and will prevent loss of equipment if the bar
becomes dislodged.
⚫
Inspect the monitor for general integrity and verify that the monitor has no obvious mechanical defects.
⚫
Review the applicable logs in QstartXML
™
to verify the status of the monitor clock, communications,
firmware, and battery pack.
⚫ Clean the monitor with paper towels, as necessary. However, do not use detergent!
Viewing Monitor Activity Logs
ADS QstartXML generates detailed logs of many activities performed involving the monitor, such as
activation, data collection, and firmware downloading. These logs, contained in the local directory or
network, are available immediately following the activity and for future access to historical information.
1. Select the monitor location for which you want to view a log from the Location Name drop-down list
in the Monitor section on the QstartXML main screen.
2. Click on the Logs button in the Functions section. This will display the Logs dialog.
Logs Dialog