ADS ECHO 9000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 35 / 105

Initial Configuration and Activation 2-17
o
Enter or edit the password corresponding to the APN in the Value 2 field.
o
Click the Add button to add the APN or modifications to the table, and then click on the OK
button. The new APN should be available for selection from the Provider drop-down list on the
Modem Setup tab or the modified information should display in the Username and/or Password
fields once the corresponding provider/APN is selected.
•
Username – This read-only field displays the username associated with the selected provider (APN).
•
Password
– This read-only field displays the password associated with the selected provider (APN).
•
Authentication
– Select
PAP (Password Authentication Protocol) in which the Username and Password
are used for communication authentication. Select CHAP (Challenge Handshake Authentication Protocol)
in which a challenge string is used for authentication. Select None in cases where the authentication
protocol is unknown or not required. This information will be provided by the wireless SIM provider. The
default selection,
None , should be sufficient in most cases.
Notification Tab
Note:
The following email and text options of the Notification tab do not apply to the
ECHO -9000-4VZ as the SIM cards in these monitors currently do not support email and text
directly from the monitor.
The Notification tab enables the user to configure the ECHO monitor to provide alarm and event (i.e., low
battery voltage) notification to up to five (5) email recipients and/or up to 5 mobile phones with text
messaging (SMS) capability. The
ECHO can also check-in daily with the designated recipients to provide
the current battery voltage and other monitor status information.
Notification Tab of Advanced Device Dialog
•
Check In
o
Enable – Select this checkbox to ensure the monitor sends a daily email and/or text message to the
designated recipients that includes status information about the monitor, such as the monitor name,
date and time, battery voltage, and wireless signal strength.
o
Hour
– Select the time each day at which the monitor will deliver the monitor status information
via email or text message to the designated recipients.