
92
Delta System Installation (cont.)
9
Once all home theater addresses are programmed into the Delta-88, repeatedly press
the PRESET button until the source display reads "MODE 3 PRGRM".
10
Press the Delta-88's ALL button. The source display will quickly read
"PROGRAMMING"......"PROGRAMMED".....and then the source name selected to that
room. This downloads all the information to the keypads on the system.
2
Programming the SSD-66 for Home Theaters
The SSD-66 has numerous addresses, several of which are used to tell the SSD-66 which zone
it is operating on. Since Delta-88s are grouped in networks of no more than 16 rooms per
network (16 networks can be incorporated in any one home), only the first sixteen addresses
on the SSD-66 actually apply to rooms. The following chart details the correlation of SSD-66
addresses to zone numbers and Delta room buttons.
Please note, if your Delta-88 incorporates VSM-8 Video Cards or RBM-50 Bass Amp Cards,
which take the place of a zone card, the zone numbers will not necessarily match up. The
imperative is that the SSD-66 address match up with the room button number.
To verify or change the SSD-66's address, follow these steps.
1
Turn the SSD-66 on by pressing the MODE button. If your SSD-66 is not getting AC, also
turn on the room that it is associated to the home theater on the Delta-88.
2
Press the SSD-66's MODE button until its display reads "SETUP MODES".
DELTA ROOM BUTTON #
SSD-66 (THX) ADDRESS
TYPCIAL ZONE #
1
00
1
2
01
2
3
02
3
4
03
4
5
04
5
6
05
6
7
06
7
8
07
8
9
08
9
10
09
10
11
10
11
12
11
12
13
12
13
14
13
14
15
14
15
16
15
16