
71
8. STORAGE AND TRANSPORTATION:
Storage and transportation:
Long term storage of your machine will require some preventive procedures to
guard against deterioration.
Drain the fuel:
1. Turn the 3 in 1 switch to “OFF”.
2. Remove the fuel tank cap, remove the filter. Extract the fuel from the fuel tank into
an approved gasoline container using a commercially available hand siphon. Then,
install the fuel tank cap.
3. Fuel is highly flammable and poisonous. Check “SAFETY INFORMATION” , and
carefully immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may
deteriorate painted surfaces or plastic parts.
4. Start the engine and leave it run until it stops. The engine stops in approx.
20 mins. Time by running out of fuel.
TIP:
•
Do not connect with any electrical devices. (Unloaded operation).
•
Duration of the running engine depends on the amount of the fuel left in the tank.
5. Drain the fuel from the carburetor by loosening the drain screw on the carburetor
float chamber.
6. Turn the 3 in 1 switch to “OFF”.
7. Tighten the drain screw.
Engine:
Perform the following steps to protect the cylinder, piston ring, etc. from corrosion.
1. Remove the spark plug; pour about one table-spoon of SAE 10W-30 into the spark
plug hole and reinstall the spark plug.
2. Recoil start the engine by turning over several times (with 3 in 1 switchnob off ) to
coat the cylinder walls with oil.
3. Pull the recoil starter until you feel compression. (This prevents the cylinder and
valves from rusting).
4. Then stop pulling.
5. Clean the outside of engine and spay antirust additive.
6. Store the generator in a dry, well-ventilated place, with the cover placed over it.
7. Lay the engine vertically.
AGi3500
Inverter
50/60/50 e 60
100/120/230
3.3
3.0
1.0
ISO8528 G2
≤5
12 - 8
DC
Non-fuse Protector
AC Control by inverter overload
protect program
170FD-3
Single cylinder, 4-Stroke,
forced air cooling, OHV
212
Unleaded Gasoline
10
0.6
BPR6ES/BP6ES(NGK)
F7RTC/F7TC
Recoil start / Electric start
Generator 578×440×510
set
45
65
MODEL
Generator
Type
Rated frequency/Hz *
Rated voltage/V *
Max. output power/kW
Power factor
AC output quality
THD/%
Noise Level dB/LpA/LwA/K 4m
(3/4 load)
DC Output/ V-A
Overload protect
Engine
Engine
Engine type
Displacement/cc
Fuel type
Fuel capacity/L
Continue Running
Time (at rated power) / h
Net weight/kg
5.5
Oil Capacity/L
Spark Model No.
Starting mode
Length×Width×Height/mm
9. TROUBLESHOOTING:
Engine can’t start:
1.
Fuel system:
•
No gasoline in the fire chamber.
•
No fuel in the fuel tank. Add fuel.
•
Fuel in tank.
•
Clogged fuel filter. Clean fuel filter.
•
Clogged carburetor. Clean carburetor
.
2.
Engine oil system:
• Oil level is low. Add engine oil.
3.
Electrical systems:
• Put the 3 in 1 switch to “CHOKE” and pull the recoil starter. Poor spark.
• Spark plug dirty with carbon or wet. Remove carbon or wipe spark plug dry.
• Faulty ignition system. Consult a fra
nchised de
aler.
Generator won't produce power:
• Safety device (DC protector) to “OFF”. Press the DC protector to “ON”.
• The AC pilot light
(
Green
)
go off. Stop the engine, and then restart.