Acopia Adaptive Resource Switch, Руководство по обслуживанию CLI

Страница: 310 / 324

Powering Down the ARX
Restoring Power
11-4 CLI Maintenance Guide
Restoring Power
To watch the boot-up messages as the system powers up, you can connect a serial line
to the ARX’s Console port. Each Hardware Installation guide shows the location of
this port, a 9600-baud, 8-N-1 terminal.
Turn the power back on with the power button or switch(es). The boot sequence takes
more than one minute to complete. After the boot sequence finishes, the Console
prompts for authentication:
...
User Access Authentication
Username:
Verifying Successful Power-Up
Use the CLI to verify that all services are back online.
Showing Overall Health
The
show health
command should not indicate any open alarms. For example, this
system is in good overall health:
bstnA6k(cfg)# show health
System Health Information
Date ID Event Description
---------------------------------------------------------------------------------------
Fri Jul 21 03:54:38 (0) - No active alarms.
bstnA6k(cfg)# ...
Repeat this command on the redundant switch if you have one. This example shows
that the peer switch is also in good overall health:
bstnA6kB(cfg)# show health
System Health Information
Date ID Event Description