Acopia Adaptive Resource Switch, Руководство по обслуживанию CLI

Страница: 160 / 324

Troubleshooting Tools
Sending Logs to an External Server
6-32 CLI Maintenance Guide
For example:
bstnA6k(cfg)# no logging destination 10.1.1.90
bstnA6k(cfg)# ...
Sending Log Messages from a VLAN Interface (optional)
By default, the log messages come from the out-of-band management interface
(labeled MGMT on the switch’s front panel). You have the option to change the
source address to an in-band (VLAN) management interface, instead: this uses the
client/server ports. (For more information on in-band management interfaces, see
“Configuring an In-Band (VLAN) Management Interface” on page 4-2 of the CLI
Network-Management Guide .)
From cfg mode, use the
management source
command to change the source interface
for outbound syslog messages:
management source vlan vlan-id
where vlan-id (1-4096 characters) identifies the VLAN. Use
show interface vlan
to list all configured VLANs and their management interfaces (see “Listing all
VLAN Management Interfaces” on page 4-6 of the CLI Network-Management
Guide ).
For example, the following command sequence uses the in-band management
interface for VLAN 25:
bstnA6k(cfg)# management source vlan 25
bstnA6k(cfg)# ...
Using the Out-of-Band Management Interface
To send syslog messages from the out-of-band management interface, the default, use
the no form of the
management source
command:
no management source
For example:
prtlndA1k(cfg)# no management source
prtlndA1k(cfg)# ...