Acopia Adaptive Resource Switch, Руководство по обслуживанию CLI

Страница: 57 / 324

Backing Up the Running Configuration
Restoring the Configuration
CLI Maintenance Guide 3-19
Restoring the Configuration
The first step to restoring the running config is to place the running-config script(s)
onto the chassis. If the scripts are already on the switch (for example, if you saved the
config(s) to the current chassis), you can skip this section. If the scripts are on an FTP
server, enter priv-exec mode and use
copy ftp
to retrieve them:
copy ftp://[ username : password @] ftp-site / file scripts destination
where
username : password @ (optional) is an FTP username and password (the
default is the username/password set by the
ip ftp-user
command),
ftp-site identifies the FTP server with an IP address or FQDN (for example,
“172.16.88.3” or “ftp.myftpsite.com”),
file is the script name at the server (lead with an extra “/” if the path is
absolute),
scripts specifies the directory for the destination file, and
destination is the script name at the chassis.
For example, the following command sequence copies the startup config from
ftp.wwmed.com:
bstnA6k> enable
bstnA6k# copy ftp://juser:jpasswd@ftp.wwmed.com/feb6startup scripts start_conf
% INFO: The copy command completed successfully.
bstnA6k# ...
Erasing the Current Configuration
You must remove the active “startup-config” file and reboot the switch before you
restore the running-config or startup-config. For example:
bstnA6k> enable