Acopia Adaptive Resource Switch, Руководство по обслуживанию CLI

Страница: 153 / 324

Troubleshooting Tools
Accessing the Syslog
CLI Maintenance Guide 6-25
HA_NO_INTERNAL_METADATA documentation:
Metadata stored on the internal chassis disk is inaccessible to the peer switch.
prtlndA1k(gbl-ns[nemed])#
...
Copying the Syslog File to an FTP Server
You can save the syslog file off to a remote FTP server for further analysis. From
priv-exec mode, use the
copy logs
command and specify the FTP server in a
destination URL:
copy logs syslog-file ftp://[ username : password @] ftp-site / file
where
syslog-file identifies the syslog file to copy,
username : password @ (optional) is an FTP username and password (the
default is set by the
ip ftp-user
command, as shown in “Setting a Default FTP
User” on page 3-1 ),
ftp-site identifies the FTP server with an IP address or FQDN (for example,
“172.16.88.3” or “ftp.myftpsite.com”), and
file is the chosen file name. Lead with an extra “/” if the path starts at the
root of the server machine; for example, “porthos//var/log/acopia/syslog”
specifies “/var/log/acopia/syslog” on server porthos. Omit the leading slash
if the file is going to the home directory for
username .
For example, the following command exits from cfg mode to priv-exec mode, then
copies the active-syslog file to a remote server:
bstnA6k(cfg)# exit
bstnA6k# copy logs syslog ftp://juser:jpasswd@ftp.wwmed.com/syslog_5-6
bstnA6k# ...