Acopia Adaptive Resource Switch, Руководство по обслуживанию CLI

Страница: 205 / 324

Troubleshooting Network Connections
Configuring Port Mirroring
CLI Maintenance Guide 7-31
For example, the following command sequence shows one active monitor session:
bstnA6k(cfg)# show monitor
Monitor Session: System
Source : Slot 3 Port 1
Destination :Mirror-Port
Mode: Rx
bstnA6k(cfg)# ...
Shutting Down Port Mirroring
Remember to shut off port-mirroring sessions when you are not actively monitoring
them. Port mirroring puts a strain on port performance. Use the
no monitor
command
to shut down a monitor session:
no monitor {system | module}
{system | module} chooses the type of monitor session to shut down.
For example, the following command sequence shuts down a
monitor module
session:
bstnA6k(cfg)# no monitor module
bstnA6k(cfg)# ...
Shutting Down Mirroring for One Source Port
Recall that you can use
monitor system
to monitor more than one port. For the
multi-port case, you can use
no monitor system
to selectively disable one source port:
no monitor system source-interface slot / port
where slot / port is the source port to stop monitoring (for example,
“source-interface 1/5”).
For example, the following command sequence stops monitoring port 3/3:
bstnA6k(cfg)# no monitor system source-interface 3/3
bstnA6k(cfg)# ...