Acopia Adaptive Resource Switch, Руководство по обслуживанию CLI

Страница: 120 / 324

Metadata Utilities: nsck and sync
De-Staging a Namespace’s Managed Volumes
5-40 CLI Maintenance Guide
You can run one nsck job at a time on a given namespace. Use
show nsck
to monitor
the progress of nsck jobs; see “Showing the Progress of nsck and sync Jobs” on
page 5-2 .
For example, the following command sequence exits to priv-exec mode and destages
the “wwmed” namespace:
bstnA6k(gbl)# end
bstnA6k# nsck wwmed destage
This operation will remove entries for all shares
from the namespace metadata. To reimport a destaged share,
enable the share in namespace-volume-share mode.
Destage all shares in namespace wwmed? [yes/no] yes
bstnA6k# ...
De-Staging a Volume
To de-stage only one volume in the namespace, use the optional volume clause:
nsck namespace destage volume volname
where:
namespace (1-30 characters) is the name of the namespace where the
destage occurs. Use the
show namespace
command to see a list of
configured namespaces.
destage specifies to destage the namespace metadata and prepare it for
reimport.
volume volname (optional, 1-256 characters) is the volume to destage (for
example, ‘/var’).