Acopia Adaptive Resource Switch, Руководство по обслуживанию CLI

Страница: 60 / 324

Backing Up the Running Configuration
Restoring the Configuration
3-22 CLI Maintenance Guide
For instructions on joining a redundant pair, refer to “Enabling Redundancy” on
page 6-16 of the CLI Network-Management Guide .
For example, the following command sequence updates the running-config on both
switches, then updates one switch with the global-config:
Peer A
SWITCH# run scripts running
SWITCH# config
SWITCH(cfg)# hostname prtlndA1k
prtlndA1k(cfg)# ...
prtlndA1k(cfg)# exit
prtlndA1k#
...
Peer B
SWITCH# run scripts running-B
SWITCH# config
SWITCH(cfg)# hostname prtlndA1kB
prtlndA1kB(cfg)# ...
prtlndA1kB(cfg)# exit
prtlndA1kB#
...
Peer A
Wait for the peers to join. Use the
show redundancy
command: when both peers and
the quorum disk are “Up,” the pair is complete.
prtlndA1k(cfg-redundancy)# show redundancy
Transitions
Node Switch/Quorum Disk Status Role Total Last (UTC)
---- -------------------- ---------- ------- ----- -------------------
*1 prtlndA1k Up Active Never -
2 prtlndA1kB Up Backup 1 16:10:43 02/08/2007
QD 192.168.74.83 Up Quorum 1 16:10:34 02/08/2007
prtlndA1k(cfg-redundancy)#
...
Exit to priv-exec mode and restore the global config:
prtlndA1k(cfg-redundancy)# end