45 Altos G540 Installation Configuration Guide
2.
Right-click on the Base System Device and select Properties.
3.
Select Driver tab and click on Update Driver.
4.
Follow the instructions. Select Search for a suitable driver for my device
(Recommended) and click on Next.
5.
Check on the Specify a location and click on Next to specify the path for
the driver. Please refer to the Directory on EasyBUILD in Driver required
section for IOAT driver.
6.
Follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel(R) 5000 Series Chipsets
Integrated Device – 1A38 listed in System devices.
ATI ES1000 Installation
1.
There is a VGA controller (VGA Compatible) listed under Other devices in
Windows Device Manager. It is the ATI ES1000 for G540.
2.
Insert the EasyBUILD 7.1 build 200 (or later) into the optical drive.
3.
Expand Drivers -> Altos G540 -> Graphics adapters -> ATI ES1000 and
double-click on Windows 2000.
4.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
5.
After installing the driver, you would see ATI ES1000 listed in Display
adapters.
MegaRAID Storage Manager Installation
1.
Please insert the EasyBUILD 7.1 build 200 (or later) into the optical drive.
2.
Expand Utilities -> Altos G540 -> LSI MegaRAID SAS 8300XLP, select
MegaRAID Storage Manger(Windows) and click on Setup.
3.
Follow the instruction, accept the license agreement and use the default
setting to the Setup Type.
4.
At Setup Type, please select StandAlone.
5.
Follow the instruction again to complete the installation.
Intel PROSet Utility Installation
1.
Please insert the EasyBUILD 7.1 build 200 (or later) into the optical drive.
2.
Expand Utilities -> Altos g540 -> Intel Gigabit Ethernet Controller, select
PROSet Utility (Windows 2000) and click on Setup.
3.
Follow the instruction and use the default setting to complete the Intel
PROSet utility installation.