Altos G540 Installation Configuration Guide
34
Configuring LSI MegaRAID SAS 8300XLP
Please refer to the Appendix C. for the LSI MegaRAID SAS 8300XLP
configuration.
Installation Tips
1.
As Windows Server 2003 can’t recognize the LSI MegaRAID SAS 8300XLP,
you need to make a driver diskette from the EasyBUILD 7.1 build 200 first
before the installation.
2.
Press F6 at the start of installation to provide the driver disk for the LSI
MegaRAID SAS 8300XLP.
3.
Select “LSI Logic MegaRAID SAS RAID Controller Driver (Server 2003 32-
bit)” as target driver
4.
After loading the RAID driver from diskette, follow the normal procedure
to finish the installation.
Chipset Driver Installation
1.
After the installation completes, you would see the following devices
with yellow mark in Device Manager.
2.
Please insert the EasyBUILD 7.1 build 200 into the optical drive
3.
Expand Drivers -> Altos G540 -> Chipset, select Windows Server 2003 and
click on Setup.
4.
Follow the instruction to install the driver and reboot the server after the