Altos G540 Installation Configuration Guide
22
Onboard VGA
8.240.50.3000 EasyBUILD 8.0 build 200 (or later)
IOAT
1.2.79.9
EasyBUILD 8.0 build 200 (or later)
Software Required
For Windows Server 2008 Installation, the following manage utilities are
required.
Software
Version
EasyBUILD Version
MegaRAID Storage
Manager
2.63-00
EasyBUILD 8.0 build 200 (or later)
Intel PROSet Utility
13.0.44.0
EasyBUILD 8.0 build 200 (or later)
Configuring MegaRAID SAS 8708ELP
Please refer to the Appendix D. for the MegaRAID SAS 8708ELP configuration.
Installation Tips
1.
Though Windows Server 2008 can recognize the MegaRAID SAS 8708ELP,
we still replace the driver with the one in EasyBUILD. Please copy
MegaRAID SAS 8708ELP driver from the EasyBUILD 8.0 build 200 to a
floppy or USB flash first before the installation.
2.
Please boot the system form the Windows Server 2008 DVD. Follow the
instructions to do the installation.
3.
When you see the “Where do you want to install Windows?” on the
screen, please insert the floppy diskette or USB flash with SAS daughter
board driver and click on Load Driver.
4.
Click on Browser and select directory of the floppy or USB flash that
contains the driver.
5.
Click on OK. You will see the supported devices listed.
6.
Select “LSI Logic MegaRAID SAS 8708ELP RAID Controller
(A:\omesetup.inf)” and click on Next.
7.
After the driver is loaded and returned to “Where do you want to install
Windows?” page, click on Drive options (advanced) to create a partition
for installation.
8.
After the partition created, click on Next to continue the installation and
follow the instructions to finish the installation.
Chipset Driver Package Installation
Please refer to the Windows Server 2008 Enterprise Edition (with LSI MegaRAID
SAS 8300XLP) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
Please refer to the Windows Server 2008 Enterprise Edition (with LSI MegaRAID
SAS 8300XLP) Gigabit Ethernet Driver Installation section.