61 Altos G540 Installation Configuration Guide
ES1000
Onboard USB 2.0
N/A
OS built-in
IOAT N/A
N/A
Software Required
The management utility for MegaRAID SAS 8708ELP can be found in the
EasyBUILD 7.1 build 600 (or later).
Software
Version
Directory on EasyBUILD
MegaRAID Storage
Manager
2.07-00 \app\g540\raid\8708ELP\Linux\
Configuring MegaRAID SAS 8708ELP
Please refer to the Appendix D. for the MegaRAID SAS 8708ELP configuration.
Installation Tips
1.
Since Red Hat Enterprise Linux 4.0 Update3 cannot recognize the
MegaRAID SAS 8708ELP, you need to make a driver diskette from the
EasyBUILD 7.1 build 600 (or later) first before the installation.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Please select the fd0 as the Driver Disk Source.
4.
Follow the instruction to load the MegaRAID SAS 8300XLP driver from the
driver diskette.
5.
At the Package Installation Defaults, select Customize software packages
to be installed.
6.
At the Package Group Selection step, select Development Tools under
Development.
7.
Follow the normal procedure to finish the installation.
Gigabit Ethernet Driver Installation
The NIC driver installation is the same as LSI MegaRAID SAS 8300XLP installed.
Please refer to the Red Hat Enterprise Linux 4.0 Update3 Installation (with LSI
MegaRAID SAS 8300XLP) Gigabit Ethernet Driver Installation section.
MegaRAID Storage Manager Installation
1.
You can find the MegaRAID Storage Manager in EasyBUILD 7.1 build 600.
Please refer to Directory of EasyBUILD in Software Required section for
the MegaRAID Storage Manager and copy the utility from the EasyBUILD
7.1 build 600 to HDD first.
# mount /media/cdrecorder
# cp –R /media/cdrecorder/app/g540/raid/8708ELP/Linux/. /tmp
2.
Install MegaRAID Storage Manager utility