87 Altos G540 Installation Configuration Guide
Installation Tips
1.
Make a driver diskette for LSI MegaRAID SAS 8300XLP and onboard Intel
82563EB Gigabit Ethernet from EasyBUILD 7.1 build 200.
2.
Boot the system from the NetWare 6.5 SP5 OS CD.
3.
At Welcome to the NetWare 6.5 server installation page, select Manual to
install.
4.
At Prepare boot partition page, create one 500 MB DOS partition.
5.
When you see the following message, please select Modify. Then, move
the cursor to Storage adapters and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
----------------------- --------------
HotPlug Support Module (optional)
Storage adapters: IDEATA, IDEATA
6.
Please select IDEATA.HAM | Standard ATA/IDE RAID Adapter and press
Delete to delete the module.
7.
Then, press INSERT key to insert the LSI MegaRAID SAS 8300XLP driver.
After the drivers are successfully loaded, you will see the driver listed as
following. Please select Return to driver summary.
Driver name Device name Status
----------------------------------------------------
IDEATA.HAM | Standard ATA/IDE/ATAPI Adapter
MEGA_SAS.HAM| LSI MegaRAID SAS Adapter
8.
Continue the installation.
9.
When you see the following message, please select Modify. Then, move
the cursor to Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Network boards:
NetWare Loadable Modules: (optional)
10.
Please press INSERT key to insert the onboard Intel 82563EB Gigabit
Ethernet driver. After the drivers are successfully loaded, please select