19 Altos G540 Installation Configuration Guide
Chipset Driver Package Installation
Please refer to the Windows Server 2008 Enterprise Edition (with LSI MegaRAID
SAS 8300XLP) Chipset Driver Installation section.
Gigabit Ethernet Driver Installation
Please refer to the Windows Server 2008 Enterprise Edition (with LSI MegaRAID
SAS 8300XLP) Gigabit Ethernet Driver Installation section.
IOAT Driver Installation
The IOAT driver will be installed automatically when you installing the onboard
Gigabit Ethernet driver.
VGA Driver Installation
Please refer to the Windows Server 2008 Enterprise Edition (with LSI MegaRAID
SAS 8300XLP) VGA Driver Installation section.
SAS Daughter Board Utility Installation
1.
For installing MegaRAID Storage Manager for SAS daughter board, please
insert the EasyBUILD 8.0 build 200 into the optical drive.
2.
Expand Utilities -> Altos G540 -> LSI SAS 1068, select MegaRAID Storage
Manager(Windows) and click on Setup.
3.
Follow the instruction, accept the license agreement and use the default
setting to the Setup Type.
4.
At the Setup Type, please select Custom Installation and StandAlone.
5.
Follow the instruction again to complete the installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise Edition Installation (with
onboard SATA RAID)
Below information describes how to manually install Windows Server 2008
Enterprise Edition on Altos G540 with onboard SATA RAID.
BIOS Required
Altos G540 BIOS
P17
(or later) is required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 Installation, the following device drivers are required.
Device
Version
EasyBUILD Version
Onboard SATA
RAID
8.0.0.1039
EasyBUILD 8.0 build 200 (or later)