Altos G540 Installation Configuration Guide
44
6.
Please insert the EasyBUILD 7.1 build 200 (or later) into the optical drive
7.
Expand Drivers -> Altos G540 -> Chipset and double-click on Windows
2000.
8.
Follow the instruction to install the driver and reboot the server after the
chipset driver is installed.
Gigabit Ethernet Driver Installation
9.
There are two Ethernet Controller listed under Other device in Windows
Device Manager. It should be the onboard Intel 82563EB Gigabit Ethernet
controller. You could find the driver in EasyBUILD 7.1 build 200. Please do
the same on both of the devices.
10.
Right-click on the Ethernet Controller and select Properties.
11.
Select Driver tab and click on Update Driver.
12.
Follow the instructions. Select Search for a suitable driver for my device
(Recommended) and click on Next.
13.
Check on the Specify a location and click on Next to specify the path for
the driver. Please refer to the Directory on EasyBUILD in Driver required
section for NIC driver.
14.
Follow the instructions to finish the installation.
15.
After installing the driver, you would see Intel(R) PRO/1000 EB Network
Connection with I/O Acceleration listed in Network adapters.
IOAT Driver Installation
1.
For Base System Device, it should be the onboard IOAT device. You could
find the driver in EasyBUILD 7.1 build 200 (or later).