17 Altos G540 Installation Configuration Guide
6.
The IOAT driver and PROSet utility will be installed together
automatically.
IOAT Driver Installation
The IOAT driver will be installed automatically when you installing the onboard
Gigabit Ethernet driver.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device. You can find
the ATI ES1000 driver in EasyBUILD 8.0 build 200. Please insert the
EasyBUILD 8.0 build 200 into the optical drive.
2.
Expand Drivers -> Altos G540 -> Graphics adapters -> ATI ES1000, select
Windows Server 2008 and click on Setup.
3.
Follow the instruction to install the VGA driver and reboot the server
after the driver is installed.
4.
After installing the driver, you would see ATI ES1000 listed in Display
adapters.
RAID Utility Installation
1.
For installing MegaRAID Storage Manager for LSI MegaRAID SAS 8300XLP,
please insert the EasyBUILD 8.0 build 200 into the optical drive.
2.
Expand Utilities -> Altos G540 -> LSI MegaRAID SAS 8300XLP, select
MegaRAID Storage Manager(Windows) and click on Setup.
3.
Follow the instruction, accept the license agreement and use the default
setting to the Setup Type.
4.
At the Setup Type, please select Custom Installation and StandAlone.
5.
Follow the instruction again to complete the installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise Edition Installation (with SAS
Daughter Board)
Below information describes how to manually install Windows Server 2008
Enterprise Edition on Altos G540 with SAS daughter board.
BIOS Required
Altos G540 BIOS
P17
(or later) is required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 Installation, the following device drivers are required.