11 Altos G540 Installation Configuration Guide
MegaRAID SAS 8300XLP) VGA Driver Installation section.
RAID Utility Installation
1.
For installing MegaRAID Storage Manager for SAS daughter board, please
insert the EasyBUILD 8.0 build 200 into the optical drive.
2.
Expand Utilities -> Altos G540 -> LSI SAS 1068, select MegaRAID Storage
Manager(Windows Server 2008 x64) and click on Setup.
3.
Follow the instruction, accept the license agreement and use the default
setting to the Setup Type.
4.
At the Setup Type, please select Custom Installation and StandAlone.
5.
Follow the instruction again to complete the installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise x64 Edition Installation (with
onboard SATA RAID)
Below information describes how to manually install Windows Server 2008
Enterprise x64 Edition on Altos G540 with onboard SATA RAID.
BIOS Required
Altos G540 BIOS
P17
(or later) is required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 x64 Installation, the following device drivers are
required.
Device
Version
EasyBUILD Version
Onboard SATA
RAID
8.0.0.1039
EasyBUILD 8.0 build 200 (or later)
Chipset
8.6.0.1002
EasyBUILD 8.0 build 200 (or later)
Onboard Gigabit
Ethernet
9.12.17.0
EasyBUILD 8.0 build 200 (or later)
Onboard VGA
8.240.50.3000 EasyBUILD 8.0 build 200 (or later)
IOAT
1.2.79.9
EasyBUILD 8.0 build 200 (or later)
Software Required
For Windows Server 2008 x64 Installation, the following manage utilities are
required.
Software
Version
EasyBUILD Version
Matrix Storage
Manger
8.0.0.1039
EasyBUILD 8.0 build 200 (or later)