Altos G540 Installation Configuration Guide
88
Return to driver summary.
11.
Then, you would see the following message. Please select Continue.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types Driver names
------------------------- --------------
Network boards: E1000E, E1000E
Network Loadable Modules: (optional)
12.
Please follow the normal procedures to complete the NetWare 6.5
installation.
ACPI PSM Module Update
NOTE. When you install the NW6.5 with the SP6 or later overlay CD, you DO
NOT need to update this ACPI PSM Module update. The SP6 or later can install
the ACPI driver correctly.
The ACPI PSM Module Update is the same as LSI SAS 1068 IM. Please refer to
the NetWare 6.5 SP5 Installation (with LSI SAS 1068 IM) ACPI PSM Module
Update section.
SCO OpenServer 5.0.7 Installation (with LSI SAS 1068)
Below information describes how to manually install SCO OpenServer 5.0.7 on
Altos G540 with LSI SAS 1068.
Drivers Required
For SCO OpenServer 5.0.7 Installation, the following device drivers are required.
Device
Version
Directory on EasyBUILD
LSI 1068 SAS
1.04.09
The driver can be found on GCSD
website
Onboard Intel
5000P Chipset
N/A OS
built-in
Onboard Intel
82563EB Gigabit
Ethernet
2.3.10
The driver can be found on GCSD
website
Onboard ATI
ES1000
N/A OS
built-in
Onboard USB 2.0
N/A
OS built-in
Patch Required
For OpenServer 5.0.7 installation, the following patches are recommended.
Patch
Where to download