PAGE 1 OF 21
0621 IH-7149
MAIL SORTER
WORKSTATION
1-800-295-5510
uline.com
π
H-7149, H-7150
H-7153
TABLE PARTS
Top Screw x 16
Back Panel
Shelf
(2 Pieces)
Leg x 4
End Panel x 2
Front Support Rail
Top
1/4-20 Keps Nut
x 18
1/4-20 Painted
Screw x 18
Glide x 4
Leg Screw x 8
TABLE ASSEMBLY
1. Unpack carton(s) and identify all parts.
2. Place table top upside down (screw holes up) on a
smooth, non-marring surface.
3. Assemble back panel, two end panels and front
support rail. It is easiest to do this with these parts
upside down on the tabletop. (See Figure 1)
a. Bolt together back panel and two end panels
with four painted screws and keps nuts (two on
each side).
b. Bolt together front support rail with open flange
facing inside with angled side against top using
four painted screws and keps nuts (two on each
side).
4. Line up frame with tabletop so that the ten holes in
the end and back panel flanges line up with the ten
pre-drilled holes in the top. Insert the sheet metal
screws through the holes and tighten into the top.
NOTE: Additional top screws are self-tapping
and can be installed without pre-drilling.
TOOLS NEEDED
Phillips Screwdriver
Allen Wrench
(provided)
Drill
(optional)
Figure 1
Para Español, vea páginas 8-14.
Pour le français, consulter les pages 15-21.
