34
NEUROPROBE
®
500 PRO USER MANUAL
COPYRIGHT © 2006 - 2017, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
SPECIFICATIONS
GENERAL:
Dimensions (with Probe):
8.0" (21cm) W x 12.0" (30cm) D x 3.5" (8.4cm) H
Weight:
3lbs. 2oz. (1. 4kg.)
Operating Power:
120 / 240 VAC; 50/60 Hz; 50W
Display System:
Super Twist LCD full character display with adjustable contrast/viewing angle.
Push Buttons:
Conductive rubber with excellent tactile feel. Speed and sensitivity are fully adjustable.
System Architecture:
Intel CMOS Integrated micro-controller with on board memory and instruction set.
STIMULATION SYSTEM:
Output:
Constant voltage up to maximum preset current limit.
Output Waveform:
AC square wave into resistive load, IFC FF 0-99 mA peak into 500 ohm load; Nerve Block mode
0 to 70 mA RMS current into a 500 ohm load; Probe Sensory, Motor 0-1.8 mA RMS 10k ohm
load Nerve block mode, O to 2.25 mA RMS current into a 10K ohm load. Noxious Mode 0-1.5
mA RMS 10K ohm load.
Channel Isolation:
Independent transformer isolation
Line Linkage:
Less than 50 micro Amps when operated with the charger system
IFC MODES:
Full Field Burst Rate:
0.1 - 999 Hz
Rate Scan:
0 - 20 seconds, 0 - 50% modulation
Vector:
- Scans amplitude of channel A from 0-maximum every 10 seconds relative to channel B,
which varies concurrently out of phase. Slow 90 - Scans amplitude of channel A from 0 - maximum
every 60 seconds relative to channel B, which varies concurrently out of phase. Fast 45 - Scans
amplitude of channel A from 50% to maximum every 10 seconds relative to channel B, which varies
concurrently out of phase. Slow 45 - Scans amplitude of channel A from 50% to maximum every 10
seconds relative to channel B, which varies concurrently out of phase.
Output:
IFC FF 0-99 mA peak into 500 ohm load, Nerve Block mode 0 to 70 mA RMS current into a 500
ohm load
PROBE SENSORY/MOTOR MODE:
Waveform:
AC square wave, 5000 Hz carrier frequency
Burst Rate:
Adjustable from .1 to 999 B.P.S., 50% duty factor
Rate Scan:
From 0-50% programmable with scan time from 0-20 seconds
Output:
0-1.8 mA RMS into 10K ohm load
PROBE NERVE BLOCK MODE:
Waveform:
AC square wave, 5000 Hz carrier frequency
Output:
0-2.25 mA RMS into 10K ohm load
PROBE NOXIOUS MODE:
Waveform:
Monophasic or Biphasic Square wave pulsed current 50% duty factor
Polarity:
+, - or +/- every alternate pulse
Burst Rate:
Adjustable from DC to 15 Hz, 50% duty factor
Output:
0-1.5 mA Peak current into 10K ohm load
INFRARED THERAPY MODE:
Waveform:
Square wave 50% duty factor
Pulse Rate:
45.4, 62.5and 83.3 KHz at 50% duty factor 1 min per frequency
