ABB IRC5 with FlexPendant, Руководство по эксплуатации

Страница: 112 / 306

3.7.2.3 Controller settings
Date and time settings
Use the following procedure to configure date and time.
Action Step
On the ABB menu, tap Control Panel . 1
Tap Controller Settings .
The Date and Time settings window is displayed.
2
In the Settings section, select Network Time or Manual Time . 3
Select Network Time for configuring the robot controller for automatic time synchronization
using NTP protocol of a time server. The time server is identified by its IP address or DNS
name. Select
Manual Time if you do not have a time server that is reachable from the
controller.
Select the required time zone from the Time Zone section. 4
In the Date and Time section, tap the + (Plus) or - (Minus) button and configure the date
and time.
5
Tap OK . 6
The selected settings are saved.
Note
The date and time are displayed according to the ISO standard. That is, date is
in the year-month-day format and time is in the hour:minute format (24-hour
format).
Network settings
Use the following procedure to configure the network.
Action Step
On the ABB menu, tap Control Panel . 1
Tap Controller Settings . 2
Navigate to the bottom menu, tap Settings , and select Network .
The Control Panel - Controller Settings - Network window is displayed.
3
Configure the network settings according to your requirements. 4
Tap OK . 5
The selected settings are saved.
Identity settings
Use the following procedure to configure the identity of the controller.
Action Step
On the ABB menu, tap Control Panel . 1
Tap Controller Settings . 2
Navigate to the bottom menu, tap Settings , and select Identity .
The Control Panel - Controller Settings - Identity window is displayed.
3
Edit the name of the controller in the Controller Name field according to your requirement. 4
Continues on next page
112 Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
3.7.2.3 Controller settings