ABB i-bus VC/S 4 1 Series, Руководство по эксплуатации продукта, Страница: 45 / 199

ABB i-bus® KNX PARAMETERS
This parameter window includes the following parameters:
→ ⁠ Operating modes, Page ⁠⁠72
→ ⁠ Operating mode after bus voltage recovery or ETS download, Page ⁠⁠73
→ ⁠ Comfort heating setpoint = Comfort cooling setpoint, Page ⁠⁠116
→ ⁠ Comfort heating setpoint, Page ⁠⁠112
→ ⁠ Comfort cooling setpoint, Page ⁠⁠115
→ ⁠ Hysteresis for Heating/cooling changeover, Page ⁠⁠89
→ ⁠ Comfort heating and cooling setpoint, Page ⁠⁠113
→ ⁠ Setpoint specification and adjustment, Page ⁠⁠117
→ ⁠ Standby heating setpoint, Page ⁠⁠113
→ ⁠ Economy heating setpoint, Page ⁠⁠112
→ ⁠ Standby cooling setpoint, Page ⁠⁠115
→ ⁠ Economy cooling setpoint, Page ⁠⁠114
→ ⁠ Standby heating reduction, Page ⁠⁠54
→ ⁠ Economy heating reduction, Page ⁠⁠54
→ ⁠ Standby cooling increase, Page ⁠⁠57
→ ⁠ Economy cooling increase, Page ⁠⁠57
→ ⁠ Base setpoint is, Page ⁠⁠68
→ ⁠ Setpoint for frost protection (building protection, heating), Page ⁠⁠111
→ ⁠ Heat protection setpoint (building protection, cooling), Page ⁠⁠114
→ ⁠ Send current setpoint, Page ⁠⁠55
→ ⁠ Cycle for sending the setpoint, Page ⁠⁠149
→ ⁠ Activate summer compensation, Page ⁠⁠118
→ ⁠ Starting temperature for summer compensation, Page ⁠⁠77
→ ⁠ Setpoint temperature offset when summer compensation starts, Page ⁠⁠105
→ ⁠ Ending temperature for summer compensation, Page ⁠⁠66
→ ⁠ Setpoint temperature offset when summer compensation ends, Page ⁠⁠104
Prerequisites for visibility
• Parameter window Channel X \ Parameter window Application parameters \ Parameter Channel
function \ Option Controller channel
• The parameter window is in the parameter window
Channel X
.
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 45
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page