ABB i-bus
®
KNX
Parameters
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 265
7.8.1.2.4.3
—
Dependent Parameter
Send group object "Status Valve purge"
Options:
No, update only
On change
Cyclically
On request
After a change or on request
After a change or request and cyclically
This parameter defines when the
Status Valve purge
group object is to be sent.
•
No, update only
: With this option only the object value for the group object is updated, however
this value is not sent over the bus.
•
On request
: The valve purging status value is sent on the receipt of a command via the
Request status values
group object.
•
On change
: The value is sent on a change in the object value (e.g. change from 0 to 1).
•
Cyclically
: If this option is selected, the status value is sent automatically after an adjustable
time has elapsed. The
Every
dependent parameter is displayed.
•
After a change or request
: The status is sent on request and on a change.
•
After a change or request and cyclically
: The status is sent on request and on a change and
cyclically. The
Every
dependent parameter is displayed.
7.8.1.2.4.3.1
—
Dependent Parameter
Every
Options:
00:00:30…00:05:00…18:12:15
This parameter is used to set the time after which the status values are to be sent cyclically. The
group objects are sent after each cycle.
7.9
Valve B
7.9.1
Valve output B parameter window
The FCC/S 1.4.1.1 does not have this parameter window, because it only has one valve output.
7.9.1.1
FCC/S 1.2.x.1 / 1.3.x.1
The following explanations only apply to:
•
FCC/S 1.2.1.1
•
FCC/S 1.2.2.1
•
FCC/S 1.3.1.1
•
FCC/S 1.3.2.1
