Visualization with the
display system
288
1SVC 440 795 M1100
Screen 2:
The second screen contains five bitmaps positioned on top of
each other with each bitmap displayed being larger than the
one displayed beforehand. The individual bitmaps are made
visible in succession via the outputs Q1 to Q4 and the marker
M01 (N/C contact bit logic). The Covered option is selected
in the Background area of the Display tab. This therefore
causes the covered section of the next bitmap behind to be
displayed. It produces the effect of a moving arrow that
increases in size.
Figure: 156:
Arrow increasing in size
Screen 3:
The third screen contains five bitmaps that completely cover
each other. These are made invisible in succession from the
top to the bottom via outputs Q1 to Q4 and LED 3 (N/O
contact bit logic). The Covered option is selected in the
Background area of the Display tab. The covered part of the
bitmaps cannot therefore be seen.
The first bitmap on the lowest level is always active. Thus it
is always visible unless one of the other bitmaps is activated.
This produces a small continuous animation.
Figure: 157:
Rotating arrows
Covered
Covered
Содержание CL Series
Страница 1: ... APPLICATION MANUAL Display system CL range ...
Страница 115: ...112 1SVC 440 795 M1100 ...
Страница 345: ...342 1SVC 440 795 M1100 ...
Страница 427: ...1SVC 440 795 M1100 424 ...