ABB CL Series, Руководство по применению

Страница: 133 / 428

Wiring with the display system
130
1SVC 440 795 M1100
Saving and loading programs
Display system provides you with two ways of saving circuit
diagrams externally:
• Saving with the memory module.
• Saving to a PC running CL-SOFT.
Once they have been saved, programs can be reloaded into
display system, edited and run.
All program data is saved in display system. In the event of
a power failure the data will be retained until the next time
it is overwritten or deleted.
Memory module
Each memory module contains a program and is inserted in
the interface of the display system.
The display system behaves in the following manner in
accordance with the type and setting.
Requirement:
A valid circuit diagram must be stored on the module.
Variants with display:
X
Go to the CARD menu and load the circuit diagram into
the unit in STOP mode via CARD
r DEVICE.
CARD MODE setting a page 360
Variants without display:
If the circuit diagram on the module is different to the circuit
diagram in the device, the program from the module is
loaded as soon as the power supply is turned on.
CL-SOFT
CL-SOFT is a PC program with which you can create, store,
test and manage display system programs, visualization
applications and circuit diagrams.
Completed programs are exchanged between the PC and
display system via the connection cable. Once you have
transferred a circuit diagram, you can start display system
straight from your PC.