ABB CL Series, Руководство по применению

Страница: 117 / 428

Wiring with the display system
114
1SVC 440 795 M1100
Operation
The cursor buttons in the display system circuit diagram
perform three functions. The current mode is indicated by
the appearance of the flashing cursor.
• Move
• Enter
• Connect
In Move mode you can use
ÍÚ ú í
to move the cursor
around the circuit diagram in order to select a rung, contact
or relay coil.
Use OK to switch to Entry mode so that you can enter or
change a value at the current cursor position. If you press
ESC in Entry mode, display system will undo the most recent
changes.
Press ALT to switch to Connect mode for wiring contacts and
relays. Press ALT again to return to Move.
Press ESC to exit the circuit diagram and parameter display.
Opening the parameter display for function blocks
with contacts or coils
If you specify the contact or coil of a function relay type in
Entry mode, the display system automatically switches from
the contact number to the function block parameter display
when you press
OK .
Press
í
to switch to the next contact or coil field without
entering any parameters.
â
I 0 1
l
h The display system performs many of these cursor
movements automatically. For example, the display
system switches the cursor to Move mode if no further
entries or connections are possible at the selected cursor
position.