AB Sciex QTRAP 4500 LC/MS/MS system Скачать руководство пользователя страница 44

Страница: 44 / 138

Operating Instructions — Hardware Profiles and Projects

4500 Series of Instruments

System User Guide

44 of 138

RUO-IDV-05-0264-A

•

If the device uses

Serial Port

as a communication interface, in the

COM Port

Number

list, select the COM port to which the device is connected.

•

If the device uses

Ethernet

as a communication interface, type the

Address

assigned to the device by the administrator or use the corresponding

Host Name

for the address.

•

If the device uses

GPIB Board

as a communication interface, do not change

the settings for the GPIB board.

The rest of the preset values for the device are probably appropriate. Do not change

them. For information about the

Configuration

and

Communication

tabs, refer to

the Help.

10. To restore the device preset values, on the

Communication

tab, click

Set Defaults

11. To save the configuration, click

12. Repeat

step 4

step 11

for each device.

13. In the

Create New Hardware Profile

dialog, click

14. To activate the hardware profile, in the

Hardware Configuration Editor

, click the

hardware profile.

15. Click

Activate Profile

The check mark turns green. If a red x is shown, then there is an issue with the

hardware profile activation. For more information, refer to

Troubleshoot Hardware

Profile Activation

16. Click

Close

Troubleshoot Hardware Profile Activation

If a hardware profile fails to become active, a dialog appears indicating which device in the profile

failed. A failed profile may be due to communications errors.

1. Read the error message generated. Depending on the message, there may be an

issue with a device or how the communication is set up.

2. Verify that the device has power and is turned on.
3. Verify that the COM port assigned to the device is correct.

Note:

For devices using serial communication, make sure that the serial

port selected matches the serial port to which the device is physically

connected. If a serial expansion cable is used, then the number selected in

the profile is the number on the cable plus two.

Note:

The

Alias

field may also be referred to as the Name box and may be

found on another tab under

Alias

Tip!

A hardware profile does not have to be deactivated before activating

another hardware profile. Click a hardware profile and then click

Activate

Profile

. The other profile is deactivated automatically.

Содержание QTRAP 4500 LC/MS/MS system











































































































































Результаты поиска

Содержание QTRAP 4500 LC/MS/MS system

Отзывы:

AB Sciex QTRAP 4500 LC/MS/MS system, Руководство пользователя системы, Страница: 44 / 138

Результаты поиска

Содержание QTRAP 4500 LC/MS/MS system

Отзывы: