AB Sciex QTRAP 4500 LC/MS/MS system Скачать руководство пользователя страница 43

Страница: 43 / 138

Operating Instructions — Hardware Profiles and Projects

System User Guide

4500 Series of Instruments

RUO-IDV-05-0264-A

43 of 138

14. In the

Create New Hardware Profile

dialog, click

15. In the

Hardware Configuration Editor

, click the hardware profile.

16. Click

Activate Profile

The check mark turns green. If a red x is shown, then there is an issue with the

hardware profile activation. For more information, refer to

Troubleshoot Hardware

Profile Activation

17. Click

Close

Add Devices to a Hardware Profile

Devices must be configured to enable the software to communicate with them.
When the software is installed, the driver required for each device is also installed. After the

devices are physically connected to the computer, configure the device.

1. Open the

Hardware Configuration Editor

2. In the

Hardware Profiles

list, deactivate the hardware profile.

3. Click

Edit Profile

4. Click

Add Device

5. In the

Available Devices

dialog, in the

Device Type

list, select the device.

6. Click

7. In the

Devices in current profile

list, select the device.

8. Click

Setup Device

A dialog containing configuration values for the device opens.

9. (Optional) On the

Communication

tab, in the

Alias

field, type a name or other

identifier.

Tip!

A hardware profile does not have to be deactivated before another is

activated. Click a hardware profile and then click

Activate Profile

. The

other profile is deactivated automatically.

Figure 6-6 Available Devices Dialog

Содержание QTRAP 4500 LC/MS/MS system











































































































































Результаты поиска

Содержание QTRAP 4500 LC/MS/MS system

Отзывы:

AB Sciex QTRAP 4500 LC/MS/MS system, Руководство пользователя системы, Страница: 43 / 138

Результаты поиска

Содержание QTRAP 4500 LC/MS/MS system

Отзывы: