AB Sciex QTRAP 4500 LC/MS/MS system Скачать руководство пользователя страница 127

Страница: 127 / 138

Service and Maintenance Information

System User Guide

4500 Series of Instruments

RUO-IDV-05-0264-A

127 of 138

Storage and Handling

If the mass spectrometer needs to be stored for a long time or prepared for shipping, contact an

AB SCIEX FSE for decommissioning information. To disconnect power from the mass

spectrometer, remove the mains supply connector from the AC mains supply.

WARNING! Environmental Hazard: Do not dispose of waste of electrical and

electronic equipment as unsorted municipal waste. It must be collected

separately. Contact AB SCIEX for more information concerning the

decommissioning of equipment.

Note:

The system must be transported and stored between -30°C to +45°C. Store the

system below 2000 m above sea level.

Содержание QTRAP 4500 LC/MS/MS system











































































































































Результаты поиска

Содержание QTRAP 4500 LC/MS/MS system

Отзывы:

AB Sciex QTRAP 4500 LC/MS/MS system, Руководство пользователя системы, Страница: 127 / 138

Результаты поиска

Содержание QTRAP 4500 LC/MS/MS system

Отзывы: