A&D RA3100 Omniace, Инструкция по эксплуатации

Страница: 92 / 176

8.Setup Details - 8.2.Main Unit Setup
92 1WMPD4004444
Network Setup
CAUTION
Caution Regarding Network Setup
When connecting this product to an on-premise network, contact the network administrator regarding
the network settings.
Tap the network Edit key on the [Comm.] setup
screen to display the network setup dialog box. Tap
OK to continue without turning off the power.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) IP address setup: Select whether "obtain automatically" (using DHCP) or "set manually"
for the LAN. The settings in (2) to (4) are not required for obtain
automatically.
(2) IP address: Manually sets the IP address of the LAN. Since the IP address is unique
to the device, make sure to set a different address when connecting two
or more of this product.
(3) Subnet mask: The value that defines the IP address range (subnet). Normally set
class C.
Class C: 255.255.255.000
Class B: 255.255.000.000
Class A: 255.000.000.000
(4) Default gateway: Sets the IP address of the gateway device for connecting the network
that the product is connected to with external networks.
(5) DNS server address setup: Select whether to automatically retrieve or manually set the IP address
of the DNS server. The settings in (6) to (7) are not required for
automatic retrieval.
(6) Preferred DNS server: Sets the IP address of the preferred DNS server on the network.
(7) Alternate DNS server: Sets the IP address of the alternate DNS server on the network.
NOTE
When using the LAN port to communicate with an external device, use port 3000.