A-Neu Video ANI-4KANA Скачать руководство пользователя страница 66

Страница: 66 / 68

anapat SOFTWARE

Cable Testing

(ANI-4KANAL Only)

The ANI-4KANAL of the Signal Generator & Analyzer includes a cable testing function

to help quantify the general feature support and error resistance capabilities of the cable

being tested. The Cable Test tab contains the controls required to perform a cable test.

To perform a cable test:

Step 1:

Connect the cable to be tested to both the HDMI input and HDMI output of the

unit.

Step 2:

Select the preferred Test Level (Normal or Strict).

Step 3:

Click on the

“Start”

button and wait for the test process bar to complete. A test in

“Normal”

mode usually takes about two minutes to complete.

Step 4:

The software will display the result of the testing (PASS or FAIL). More detailed

information from the test is available on the unit itself.

NOTE:

A FAIL result does not necessarily mean that the cable cannot pass an 18Gbps

signal under ideal circumstances, however it is an indication of a high number of detected

data errors that could result in unreliable or unstable performance with high-bitrate signals

in less than optimal conditions.

Содержание ANI-4KANA





































































Результаты поиска

Содержание ANI-4KANA

Отзывы:

Бренды по названию

Популярные бренды

A-Neu Video ANI-4KANA, Инструкция по эксплуатации

Результаты поиска

Содержание ANI-4KANA

Отзывы:

Бренды по названию

Популярные бренды