A-Neu Video ANI-4KANA Скачать руководство пользователя

Страница: 55 / 68

anapat SOFTWARE

INSTALLATION

Before beginning the installation of the software, please remember to uninstall any

previously installed versions of the software, to avoid potential conflicts, by using the

Windows

“Add or Remove Programs”

function.

Next, please obtain the

“Anapat”

software from your authorized dealer and save it in a

directory where you can easily find it. Extract all files from the

Anapat.zip

file, find the

Setup.exe

file and execute it to launch the Installation Wizard.

Follow the installation prompts and select your preferred installation location to complete

the installation.

After the installation has completed, a copy of the

Anapat

shortcut will be placed

within your

Start

menu and it will have the same icon as seen here.

CONNECTION

The Anapat software can connect to the ANI-4KANA via RS-232 or Ethernet. The ANI-

4KANAL via RS-232 (Using the Micro-USB port). Please follow the steps below to connect

using the method appropriate for the device you wish to control.

CONNECT VIA ETHERNET

(ANI-4KANA Only)

Step 1:

Start the Anapat software by clicking on it in the

Start

Menu.

Step 2:

Select

“Ethernet”

as the control interface.

Step 3:

(If you already know the IP address of the unit, skip to Step 4.)

If you do not

know the IP address of the unit you wish to connect to, click on the

“Find IP”

button. This

will open up a window listing all available units on the local network.

Содержание ANI-4KANA





































































Результаты поиска

Содержание ANI-4KANA

Отзывы:

Похожие инструкции для ANI-4KANA

Бренды по названию

Популярные бренды

A-Neu Video ANI-4KANA, Инструкция по эксплуатации

Результаты поиска

Содержание ANI-4KANA

Отзывы:

Похожие инструкции для ANI-4KANA

Бренды по названию

Популярные бренды