A-Neu Video ANI-4KANA Скачать руководство пользователя

Страница: 4 / 68

NEU

VIDEO

TABLE OF CONTENTS

INTRODUCTION / PACKAGE CONTENTS .......................................................................2

FEATURES / SYSTEM REQUIREMENTS ........................................................................ 3

SPECIFICATIONS / APPLICATIONS .................................................................................4

SUPPORTED COLOR / AUDIO FORMATS........................................................................6

OPERATION CONTROLS & FUNCTIONS .......................................................................7

REMOTE CONTROL .......................................................................................................11

RS-232 & TELNET COMMANDS ....................................................................................13

OSD MENU ......................................................................................................................10

RS-232 PROTOCOL & TELNET COMMANDS ................................................................13

SOURCE VIDEO TIMING LIST ........................................................................................24

TELNET CONTROL

.........................................................................................................26

OSD MENU ......................................................................................................................27

TEST TIMINGS

TEST PATTERNS.................................................................................40

CONNECTION DIAGRAM / ACRONYMS ......................................................................52

ANAPAT SOFTWARE ......................................................................................................53

INTRODUCTION

The ANI-4KANA HDMI Signal Generator & Analyzer is an advanced and handy tool for

generating, testing and verifying the signal path within your 18Gbps HDMI ecosystem.

With (87) built-in resolutions, (56) test patterns and over a dozen types of A/V analysis

functions, this unit provides an enormous range of testing options. HDMI data packet,

EDID and HDCP analysis is supported along with EDID upload and emulation.

Additionally the Status and Control Data Channel (SCDC) can be monitored, allowing

HDMI 18Gbps signal detection and analysis. Up to (8) channels of LPCM audio test tones

can be generated with a wide range of frequencies. This unit also supports the ability to

upload up to (2) user-generated graphic files which can be used as additional test patterns.

The use of multi-function and multi-color backlit buttons allows for easy operation of the

unit’s wide variety of functions and a clear OLED display provides a way to quickly view the

current signal status information. In addition to the front panel buttons, the unit can also be

controlled via RS-232, Telnet, and IR providing a complete range of control options. This

unit comes with a 3 year warranty.

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the

following items are contained in the shipping carton:

•

HDMI Signal Generator & Analyzer

• Remote Control (ANI-174)

• DC to USB Type-A Power Cable

• Users Guide

• 5V/2.6A Power Adaptor

Содержание ANI-4KANA





































































Результаты поиска

Содержание ANI-4KANA

Отзывы:

Похожие инструкции для ANI-4KANA

Бренды по названию

Популярные бренды

A-Neu Video ANI-4KANA, Инструкция по эксплуатации

Результаты поиска

Содержание ANI-4KANA

Отзывы:

Похожие инструкции для ANI-4KANA

Бренды по названию

Популярные бренды