A-Neu Video ANI-4KANA Скачать руководство пользователя страница 28

Страница: 28 / 68

Telnet Control

Before attempting to use Telnet control, please ensure that both the unit and the PC/laptop

are connected to the same active network.

To Access Telnet

Windows 7

Click

START

, type

“cmd”

in the search field and press

ENTER

Windows 10

1. Open

“Control Panel”

2. Open

“Programs and Features”

3. Select the

“Turn Windows features on or off ”

option.

4. Check the

“Telnet Client”

box.

5. Click

“OK“

. A box will appear that says

“Windows Features”

and

“Searching for required files”

. When complete, the Telnet client

should be installed in Windows.

In Mac OS X

Click

Go > Applications > Utilities > Terminal

Once in the Command Line Interface (CLI), type

“telnet”

followed by the current IP

address of the unit and

“23”

, then hit

ENTER

. See below for reference.

This will connect us to the unit we wish to control. Type

“help”

to list the available

commands.

NOTE:

• The default IP address is 192.168.1.50. If the IP address is changed then the IP address

required for Telnet access will also change accordingly.

• All commands MUST start with the “$” character or the command will not be recognized by the

unit. Commands must end with a carriage return (0x0D). Use of a line feed (0x0A) is optional.

Commands are not case-sensitive.

Содержание ANI-4KANA





































































Результаты поиска

Содержание ANI-4KANA

Отзывы:

Бренды по названию

Популярные бренды

A-Neu Video ANI-4KANA, Инструкция по эксплуатации

Результаты поиска

Содержание ANI-4KANA

Отзывы:

Бренды по названию

Популярные бренды