A-Neu Video ANI-4KANA страница 47 Скачать руководство пользователя

Страница: 47 / 68

Test PATTERNS

24. DOT

The

Dot

pattern is a full field black & white pattern with a repeating

pattern of single-pixel (resolutions below 4K) or 4-pixel (at 4K) white

dots surrounded by single pixels of black. This pattern is ideal for

testing the signal path/display for bandwidth issues, interference,

cross-talk or scaling issues.

25. GENERAL (3 VARIATIONS)

The

General

pattern is an all-purpose, multi-pattern test to visually

check for multiple issues simultaneously. It includes color bars, 8-step

greyscale, vertical and horizontal multi-burst, cross hatch, circle and

motion patterns. There are (3) variations: No motion, slow motion and

fast motion.

26. GRAYSCALE 8 (3 VARIATIONS)

The

Grayscale 8

pattern provides a way to check and adjust the contrast, brightness

and grayscale tracking of your display with (8) bars progressing from 0% to 100%

brightness in even steps. When testing a display, no color should be visible in any of

the bars, and all bars should be visible and distinct. There are (3) variations: (8) vertical

bars, (2) sets of (8) vertical bars with the lower set reversed, and (8) horizontal bars.

27. GRAYSCALE 16 (3 VARIATIONS)

The

Grayscale 16

pattern provides a way to check and adjust the contrast, brightness

and grayscale tracking of your display with (16) bars progressing from 0% to 100%

brightness in even steps. When testing a display, no color should be visible in any of the

bars, and all bars should be visible and distinct. There are (3) variations: (16) vertical

bars, (2) sets of (16) vertical bars with the lower set reversed, and (16) horizontal bars.

28. GRAYSCALE 32 (3 VARIATIONS)

The

Grayscale 32

pattern provides a way to check and adjust the contrast, brightness

and grayscale tracking of your display with (32) bars progressing from 0% to 100%

brightness in even steps. When testing a display, no color should be visible in any of the

bars, and all bars should be visible and distinct. There are (3) variations: (32) vertical

bars, (2) sets of (32) vertical bars with the lower set reversed, and (32) horizontal bars.

Vert. Bar

Vert. L/R Bar

Hori. Bar

Vert. Bar

Vert. L/R Bar

Hori. Bar

Содержание ANI-4KANA





































































Результаты поиска

Содержание ANI-4KANA

Отзывы:

Похожие инструкции для ANI-4KANA

Бренды по названию

Популярные бренды

A-Neu Video ANI-4KANA, Инструкция по эксплуатации

Результаты поиска

Содержание ANI-4KANA

Отзывы:

Похожие инструкции для ANI-4KANA

Бренды по названию

Популярные бренды