User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
26
5)
Set the tracking duration. The speed dome stops tracking when the duration time is up. The
duration ranges from 0 to 300 seconds.
NOTE:
!
Setting the duration to 0 means that there’s no duration when speed dome tracks.
!
Not all the speed dome models support this function. Please take the browser interface of
the actual product as standard.
5.8
Configuring PTZ Control Priority
!
The speed dome can be controlled by network and RS-‐485 signals. You can set the control
priority of these two signals.
!
The operation of
Operator
is prior to that of
User
. When the
Operator
is controlling the
speed dome, the
User
cannot control it. When the
Operator
finishes, the
User
can control
the speed dome after the
Delay
time. The
Delay
time can be set in Priority PTZ interface as
shown follows.
Figure 5-‐13
PTZ Priority
5.9
Clearing PTZ Configurations
Purpose:
You can clear PTZ configurations in this interface, including all presets, patrols, patterns, privacy
masks, PTZ limits and scheduled tasks.
Steps:
1)
Enter the Clearing Configuration interface:
Configuration > Advanced Configuration> PTZ > Clear Config
2)
Check the checkbox of the items you want to clear.
3)
Click
to clear the settings.