User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
14
A preset is a predefined image position. For the defined preset,
you can click the calling button to
quickly view the desired image position.
!
Setting a Preset:
Steps:
1)
In the PTZ control panel, select a preset number from the preset list.
Figure 4-‐5
Setting a Preset
2)
Use the PTZ control buttons to move the lens to the desired position.
!
Pan the speed dome to the right or left.
!
Tilt the speed dome up or down.
!
Zoom in or out.
!
Refocus the lens.
3)
Click
to finish the setting of the current preset.
4)
You can click
to delete the preset.
NOTE:
You can configure up to 256 presets.
!
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
to call the preset.
Figure 4-‐6
Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
6)
Select any preset from the list.
7)
Click the preset number you need on the keyboard.