3D Systems sPro, Руководство пользователя

Страница: 195 / 280

SLS p r o c e s s 1 9 5 S L S S Y S T E M
u s e r ’ s g u i d e s h u t t i n g d o w n t h e S L S s y s t e m
S h u t t i n g D o w n t h e S L S Sys t e m
Follow the procedures below to shut down the
SLS system safely and properly. The procedures
cover three types of shutdown:
`
Normal shutdown
`
Shutdown for service
`
Emergency shutdown
1
If you must shut
down the SLS system
during a build, pause
the build first, then
terminate it.
2
If the RCM is loaded,
unload the RCM using
the
Piston Control
window in Man Ops .
L
If Sinter is not running, you must run it first,
then unload the RCM in
Man Ops .
3
Exit the Sinter application (if it is running).
4
Shut down Windows.
5
Depressurize. Close the valves on
compressed air lines that serve the
SLS equipment below in this order:
a IRS
b BOS
c SLS system
L
Depressurizing stops all powder transport
in and between the IRS, BOS, and SLS
system.
Use an SLS system E-stop button to
shut down the system
only in an
emergency. (See Emergency
Shutdown on page 40.) Shutting
down a machine with E-stop can
result in data loss and material waste.
See Pausing a Build
on page 86
See Unloading RCM
(Removing the Part
Cake)
on page 93