3D Systems sPro, Руководство пользователя

Страница: 266 / 280

SLS p r o c e s s 2 6 6 G L O S S A R Y
u s e r ’ s g u i d e
T
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
SYSTEM ENABLE light When this green UI
console light is on, you can load an RCM , then
use the heaters , laser , part piston , and roller .
The SYSTEM ENABLE light turns on
automatically after you run Sinter and the
dspif program initializes.
T
terminate build To stop a
build in progress.
Terminating a build
turns off the heaters
and does not maintain an inert state.
Depending on the material and the elapsed
time, you can restart a terminated build .
U
UI U ser I nterface. The adjustable console
mounted on the front of the SLS® system . The
UI includes the computer display, keyboard,
and trackball, as well as the
SYSTEM ENABLE
light , SYSTEM SECURE light , E-stop button ,
LASER ON light, CHAMBER LIGHT button,
two USB (Universal Serial Bus) ports, and
service access keyswitch.
UPC U pper P rocess C hamber - part bed heaters
and IR sensor w/blackbody; O2 sensor
Used bin (On IRS top left
rear corner) receives
used powder from the
BOS when the BOS is in
RECYCLE mode, and stores it for blending
with virgin powder . The IRS transfers used
powder from the Used bin to the Blender bin
one batch at a time. The Percent Virgin
process parameter determines how much
used powder is withdrawn from the Used bin
each
batch .
used powder Powder that has been through a
build . Used powder is recycled or disposed of
after a build . Used powder surrounds part s in
the part cake . During breakout , the BOS sifts
used powder, then (in RECYCLE mode),
sends it to the IRS’s Used bin , or (in
DISPOSAL mode) sends it to the waste
powder drum. Used powder cannot be
recycled indefinitely. See your
DuraForm
Material Guide for material-specific recycling
instructions.
user
See operator .
See also pause
build
See also Virgin bin
and Blender bin