3D Systems sPro, Руководство пользователя

Страница: 48 / 280

SLS p r o c e s s 4 8 S L S P R O C E S S
u s e r ’ s g u i d e S L S p r o c e s s s t e p s
6
Once the Part Piston has been homed,
maximize the Sinter application and select
Start position in the Piston Control screen.
7
Continue Build Set-Up
8
Once the piston has been homed, open the
Roller command and select the home radio
button.
9
As soon as the roller is homed, select the
Level Powder command and begin leveling
powder.
10
Once the machine has reached an inert level
(<5.5% O
2 ), select the Heat radio button to
open the heater function and enable all of
the heater selections.
11
Continue performing Build Set-Up function.
Once the Build Set-Up is complete and has
been Saved and Verified, close Build Set-Up.
12
In Sinter, select the blue Exit button to close
all running applications. Select the blue Exit
button one more time to close the ManOps
function.
13
Select Build>Start Build, confirm that the
correct material has been loaded, and, when
prompted, push the start button on the
machine.
14
When the build has completed, open the
front access panel, unplug and remove the
RCM.
15
If a controlled cool-down is not required, the
RCM can be moved directly to the BOS for
part removal.
16
Once in the BOS, the parts are removed from
the cake and the remaining powder is
processed through the BOS to the IRS.
17
Clean the machine, insert the next RCM, and
repeat the process.